` Stainless Steel Inset Sink Bowls | Bespoke Insert Sink Bowls
Catering Stainless Steel products

Catering Stainless Steel : Stainless Steel Sink Bowls

Stainless Steel Inset Sink Bowl

Stainless Steel Inset Sink Bowls from DSM are a high quality design suitable for a wide range of applications, their high level of impact and stain resistance, solid robust construction and easily maintained high level of hygiene make them perfect for any catering situation.

Stainless Steel Inset Sink Bowls are designed to fit into a ‘cut-out’ (from above) in any existing or newly installed worktop surface. Each unit features a kinked inset flange and integral worktop fixing clips to provide a , in order to provide a water tight seal with the worktop*.

Stainless Steel Inset Sink Bowls can be produced to a variety of standard sizes (see table below) in 316 or 304 grade stainless steel.

In addition DSM can fabricate a bespoke bowl to virtually any custom size to precisely fit a specific application.

Available Standard Stainless Steel Bowl Sizes:

Grade

Length

Width

Depth

Waste Position

304 or 316

420mm

350mm

200mm

Centre Back

304 or 316

500mm

400mm

200mm

Centre Back

304 or 316

500mm

400mm

250mm

Left Back / Right Back

304 or 316

500mm

400mm

300mm

Left Back / Right Back

304

610mm

455mm

250mm

Left Back / Right Back

304 or 316

610mm

455mm

300mm

Left Back / Right Back

 

Bespoke Stainless Steel Inset Sink Bowls

Bespoke Stainless Steel Inset Sink Bowls from DSM offer the highest possible quality available. Each bowl is hand made from premium sheet stainless steel which results in a stronger more highly finished unit with the added advantage of being the exact size required for the specific application.

Bespoke Stainless Steel Inset Sink Bowls can be made to any length, any width, and any depth up to 450mm. All are made with 32mm radius corners as standard, however these can be made with square box-style corners if required. All come with a 30mm kinked inset flange as standard, though this size can also be varied if required.

Waste and overflow holes can be positioned virtually anywhere to match the proposed installation. (Note: A back left/right position is advised for larger bowls to ensure proper water exit flow.)

Waste and Overflow options:

Stainless Steel Inset Sink Bowls can be supplied by DSM with either:

• Standard waste and overflow kit with plug assembly

• Un-slotted waste with upstand strainer waste and overflow tube

• Acid resistant polypropylene waste and overflow kit

• Acid resistant un-slotted polypropylene waste with upstand waste and overflow tube

* With the use of appropriate sealant during installation.

product_123_1_largeInset Stainless Steel BowlStainless Steel Inset BowlInset Sink Bowl Edging
product_123_1_largeInset Stainless Steel BowlStainless Steel Inset BowlInset Sink Bowl Edging
Click image to enlarge
If you require any more information on this product please don't hesitate to Contact us
Back to products