` Stainless Steel Large Bowl Inset Sinks
Laboratory Stainless Steel products

Laboratory Stainless Steel : Stainless Steel Laboratory Sinks

Stainless Steel Large Bowl Inset Sinks

Stainless Steel Large Bowl Inset Sinks are a high quality design suitable for a wide range of applications, their high level of chemical and stain resistance, solid robust construction and easily maintained hygienic finish make them perfect for any laboratory situation.

Stainless Steel Large Bowl Inset Sinks dispense with the rear tap ledge in order to allow the use of an extra large Stainless Steel Laboratory Bowl whilst still being benefiting from the slim profile inset style designed to fit into a ‘cut-out’ in any existing or newly installed laboratory worktop surface. Each unit features integral water retaining edging and adjustable worktop fixing clips, in order to fasten to the underneath of the worktop. In addition these special sinks can have a side placed tap ledge if required, so utilising the sink unit to house the taps whilst still benefiting from the extra large bowl size.

Stainless Steel Inset Sinks can be manufactured to any length and can include any number of a variety of standard size bowls (see table below) in 316 or 304 grade stainless steel. In addition DSM can fabricate Bespoke Stainless Steel Bowls to virtually any custom size to precisely fit a specific application (See below).

Available Standard Stainless Steel Bowl Sizes:

Grade

Length

Width

Depth

Waste Position

304 or 316

420mm

350mm

200mm

Centre Back

304 or 316

500mm

400mm

200mm

Centre Back

304 or 316

500mm

400mm

250mm

Left Back / Right Back

304 or 316

500mm

400mm

300mm

Left Back / Right Back

304

610mm

455mm

250mm

Left Back / Right Back

304 or 316

610mm

455mm

300mm

Left Back / Right Back

 

Bespoke Stainless Steel Laboratory Bowls:

Bespoke Stainless Steel Laboratory Bowls from DSM offer the highest possible quality available for inclusion in your Stainless Steel Laboratory Inset Sink. Each bowl is hand made from premium 316 grade sheet stainless steel which results in a stronger more highly finished unit with the added advantage of being the exact size required for the specific application.

Bespoke Stainless Steel Laboratory Bowls can be made to any length, any width, and any depth up to 450mm. All are made with 32mm radius corners as standard, however these can be made with square box-style corners if required. All come with a 30mm kinked flange as standard, though this size can also be varied if required.

Waste and overflow holes can be positioned virtually anywhere to match the proposed installation. (Note: A back left/right position is advised for larger bowls to ensure proper water exit flow.)

Waste and Overflow options:

Stainless Steel Inset Bowls can be supplied with either:

• Standard waste and overflow kit with plug assembly

• Un-slotted waste with upstand strainer waste and overflow tube

• Acid resistant polypropylene waste and overflow kit

• Acid resistant un-slotted polypropylene waste with upstand waste and overflow tube

Bespoke Stainless Steel Inset SinkStainless Steel Inset SinksStainless Steel Large Bowl Inset SinksStainless Steel Inset Sink
Bespoke Stainless Steel Inset SinkStainless Steel Inset SinksStainless Steel Large Bowl Inset SinksStainless Steel Inset Sink
Click image to enlarge
If you require any more information on this product please don't hesitate to Contact us
Back to products